Please note this is an information page only, to request a quotation please use this page to provide the correct measurements you require. Measurements can be sent to [email protected], or call our office on 01557 330616.
JSF are proud to supply Steadman's profiled sheeting range across Mainland UK which includes box section roof, wall, liner and insulated panels, as well as traditional 3" corrugated sheets. Drain dripstop, more commonly referred to as anti-condensation fleece backing, is an available option with both AS30R and AS13/3 profiles. Venting comes as a popular option on the AS24 wall panels, and is very effective on agricultural buildings housing livestock. The AS35 profile is mainly supplied in composite panels with insulation depths available from 40mm up to 120mm.
The profiles are supplied cut to length (minimum length 1100mm) in either plain galvanised, or the more popular Polyester (spray painted) or Plastisol (PVC coated), and available in a wide range of colours. Steadman's can fold Flashings to bespoke designs within a maximum overall girth of 1220mm, and up to as many as 7 bends in lengths up to 6000mm. A full range of galvanised Zed and Cee section purlins can also be supplied along with all associated components, such as anti-sag bars and braces. JSF are stockists of a large variety of fixings suitable for fixing steel profiled sheeting, whether it be into timber, light or heavy steel.
For a quotation we need the building measurements, profile selection (roof or wall), profile finish (polyester or plastisol), colour required and whether flashings and fixings are required. Options like vented, anti-condensation and composite can also be chosen.
* Overall length is measured from gable to gable *
Building Measurements Required
Sheet Length Or Pitch Known
- Is it a Mono Pitch or an Apex Roof
- What is the sheet length or pitch
- What is the gable width of your building
- What is the overall length of your building
Sheet Length Or Pitch Unknown
- Is it a Mono Pitch or an Apex Roof
- What is the overall height of your building
- What is the eaves height of your building
- What is the gable width of your building
- What is the Overall length of your building
Gable Or Side Sheets Required
- Is it a Mono Pitch or an Apex Roof
- What is the overall height of your building
- What is the eaves height of your building
- What is the gable width of your building
- What is the Overall length of your building
Profile Selection
AS13-3/990
Roof/Wall Profile
- Comes in 0.5mm or 0.7mm
- Same profile used for wall and roof
- Effective cover width 991mm
- Double overlap recommended
- Anti-condensation lining can be applied
AS24/1000
Roof Profile
Wall Profile
- Comes in 0.5mm or 0.7mm
- Roof and wall profile available
- Effective cover width 1000mm
- Wall sheets can be vented
AS30/1000
Roof Profile
Wall Profile
- Comes in 0.5mm or 0.7mm
- Roof and wall profile available
- Effective cover width 1000mm
- Anti-condensation lining can be applied
AS35/1000
Roof Profile
Wall Profile
- Comes in 0.5mm or 0.7mm
- Roof and wall profile available
- Effective cover width 1000mm
- Can be used for composite panels
AS24 wall profile can be vented at an extra charge
Anti-condensation lining can be applied to AS13 and AS30 roof profiles (Minimum of 4° roof pitch)
Curved, Composite, Flat Sheets and "Special Profiles" are also available upon request.
Colour Selector
When selecting a colour for your sheet there are two choices of finish. A Polyester coated sheet is a cheaper option but it isn't guaranteed to last as long. A Plastisol coated sheet is more expensive but gives a better finish and lasts longer. All colour choices below are available in a Plastisol finish, but only selected options are available in Polyester. High volume colours are the cheapest option as these are the most popular. Costs increase from standard colours to special colours. *Please note the colours shown aren't an exact match. You can request a colour sample to be sent out for comparison if required*
High Volume Colours
*Also available in Polyester coated finish
Standard Colours
*Also available in Polyester coated finish
Special Colours
For any questions, or if you want to request a quotation, please contact us at [email protected], or call our office on 01557 330616.