Overview
Description
These 90 degree Deepstyle bends are used at the corners of an installation. These fittings can be used on either external or internal corners. The guttering should always be supported by a fascia bracket within 150mm (6”) of any corner. This is to prevent water from collecting in the fitting, which in turn would cause the gutter angle to drop down, putting stress on the joints and reducing the flow rate.
Related Products
-
Brett Martin Union Bracket
As low as £14.28 £11.90 -
Brett Martin 4M Gutter
As low as £65.76 £54.80 -
Brett Martin Internal Stop End
As low as £6.66 £5.55 -
Brett Martin External Stop End
As low as £12.42 £10.35 -
Brett Martin Fascia Bracket
As low as £6.00 £5.00 -
Brett Martin Down Pipe Connector Double Socket
As low as £12.42 £10.35 -
Brett Martin 4m Downpipe c/w Socket
As low as £78.62 £65.52 -
Brett Martin 6M Down Pipe c/w Socket
As low as £118.15 £98.46 -
Brett Martin Shoe
As low as £22.98 £19.15 -
Brett Martin Downpipe Bend 92½°
As low as £22.98 £19.15 -
Brett Martin Downpipe Bend 112½°
As low as £22.98 £19.15 -
Brett Martin Single Downpipe Connector
As low as £12.42 £10.35 -
Brett Martin Double Downpipe Bracket
As low as £5.52 £4.60
